Hellooo! Im A New Simblr And Im Looking For People To Follow Who Are MM Related Content. Please Reblog

Hellooo! I’m a new Simblr and I’m looking for people to follow who are MM related content. Please reblog or like if you’re maxis match! I hope to meet a lot of you guys in the Simblr community and make some new friends along the way ^.^

Do what you want cuz a pirate is free you are a pirate YARRRRRRRRrrrr

Maybe I’ll do more characters

Swordtember 2023 (part 2) by Mukhlis Nur

LETS PARTY!!!

these will be available as charms very soon!

Occult signs? In YOUR area? It’s more likely than you think.

Silly CC I decided to make in my boredom. They’re posters!

More info at https://www.patreon.com/posts/84391865?pr=true

Custom HIOMAIKA(+Dex)

After months of getting stuff they're finally done! Got some nendo parts along with YMY dolls to make them real.

Before anything was done and Maika had her final clothes:

After the paint was done and Maika got her clothes:

To be honest I barely had to do much stuff in terms of applying epoxy over to make things or sand areas.

They still are far away from being perfect since they could have had way more sanding for a better cleaner look and the colors could have been better if I didn't try to keep touching them while they dried orz

Still, this is good enought to me!

Materials used for the extra parts:

Tamiya Epoxy Putty (Smooth Surface), the one that takes 12 hours to dry;

Sanding Paper that I didn't use as much as I should;

Tamiya Primer;

Tamiya LP-43 (pearl white), LP-52 (clear red), LP-8 (pure yellow), LP-10 (thinner) and LP-65(rubber black);

Acrilex Thinner since i ran out of the Tamiya after making a mistake and using thinner without paint;

Acrilex Fixative Varnish (spray and liquid);

Super Glue;

Mini Oxygen Injector ForeverLily.

The colors weren't the best for painting hair since they are for better for cars in the case of LP-52 and LP-43, so any weird thing is due to that. However the effect that LP-43 and LP-65 gave when mixed for Dex's gray hair did have a nice result.

I also ended up breaking the mini oxygen injector's paint/liquid supplier because i dropped it twice in different days so this post will be a warning tale 😔

Hair styles used:

Maika: Nendoroid Doll Alice for the front and Eris Boreas for the back

Hio: Rider/Ozymandias

Dex: Luo Tianyi this wasn't on purpose at all I swear

MAIKA's clothes progress

Maika had parts of her clothes custom made by a relative since her outfit wasn't as simple to get by purchase only unlike the other two.

Dex and Hio's outfits can still get some accessories for a complete version compared to how they are at the moment aside their coats.

This relative can't draw so I had to help by drawing a reference and staying with them while they sewed to make sure it was what I had in mind for this.

Because of that it took quite a while since they kept remaking stuff until it got done in a way they liked and we could only do it once in a while. For the early photos the glovelettes were pretty much not used since we were still figuring out how that would work 😅

Maika's clothes have small snap fasteners to close them.

And here's final look for Maika's clothes:

How steps went by during these past few months:

Getting the hair parts → start sanding them → finishing Maika clothes → starting applying epoxy and adjusting more with sanding → priming → painting → varnish

Hair progress

Maika had to get her hair roll and some patching up to hide the headband of the back hair.

As for Hio he only missed his side hair and the slightly long hair on the side.

This is one of the areas that I didn't sand as much as possible so it could have been better, but since it barely shows up it didn't make a big difference.

His "long" hair part fell down so super glue was used to put it back in place. During the painting process his side hair also fell so, once again, super glue saved the day.

Meanwhile Dex had some big holes to cover, he was the first one to be "completed" from the first day since the main issue that had to be done was the easiest to fix compared to Maika's hairband and Hio's side hair.

These holes were what gave away that this was Tianyi's hair since either it was some long hair part that were attached to it or twin tails, which was the keyword used to figure out who was the hair donor 😅

There also were some holes in the back of the head so these helped a lot to make sure that it really was her.

Applying primer was ok without many issues ignoring that I didn't want to sand more, the biggest issues happened over the painting.

From the get go Dex was the only one who worked, I made some mistakes and wasted thinner thinking that I had it mixed with paint while it wasn't so he was the only one that didn't have any major issues during the first day of painting to the point that I went ahead an applied some varnishing. 🤡

Dex came out pretty ok, had to do some fixing with a brush and even after that paint more since I tested how he looked closed and he wasn't 100% dry yet so his head pieces almost got stuck together.

For the second and third day Hio and Maika's hairstyles got done with the oxygen injector becoming unable to use since each day I broke one of the liquid suppliers RIP. Fortunately on the last day it happened after Maika was done.

After this the spray varnish was applied and they were left to dry a bit. Fortunately everything was already sort of done so I didn't have much else to do...

Until I accidentally scratched Hio's head on the front and his front bangs ended up with a hole in it 💀 I tried to patch it up with oil pastels when liquid varnish was applied so it's not 100% noticiable as it was before it.

The liquid varnish was just to make sure that the heads wouldn't be sticky as some model kit and miniature painters/reviewers on BR YT and blogs mentioned Acrilex's pray varnish could leave stuff sticky due to temperature and other things, so that was what had to be fixed for the last stage.

And with that, here's the final result:

I'm pretty happy with how their hair came out. Maika's head is pretty easy to remove while the other two are hard to insert and remove, need to be really careful to not mess up anything while doing it.

Before finishing the post, here are a few notes for the hair styles and the doll bodies used:

Dex

Somehow was the easiest to get between the 3;

His main issue was actually the liquid varnishing that probably was way too much so it looks like he got glue on his hair, which I'm going to try to avoid touching as much as possible to not make it even worser;

Maika

Maybe applied way too much white paint after some mistakes that made me waste thinner;

Red hair is pretty dark compared to the photos. It's pretty close to the red of Sylvanian Families Cruising Car that I used as reference for this chibi art, so at least it's a really pretty kind of red;

Hio

His hair went from yellow to a more dark orange tone to this in the final result. It's far from his original hair color, however this is good since I couldn't really picture him with a super light blonde color nor did I want to make him closer to the original;

Actually the hardest hair in terms of applying epoxy putty since his side bangs had to be made.

YMY body:

The ver. 1 YMY has more knee articulation compared to the ver. 2. Both Hio and Maika use the second version and they can't sit on top of their knees like Dex. For an easy example it's like how Body-kun has knee articulation while Body-chan does not have that;

Ver. 2 has hands for both sides of the body while the ver. 1 only came with right hand for different hand types. Ver. 2 also got two chests that you can exchange (the one it came with and the alternate version);

Different stands. Ver. 1 has one similar to doll stands (straight stand, doesn't have articulation) while ver. 2 is more similar to nendoroid stands (3 articulation points). You can see them properly on the photos that came before these notes.

And here's a before and after the epoxy and paints were applied:

If you managed to get to the end of this post, I hope you liked it!

This took around 5 months to finish since parts started getting delivered, doing epoxy and painting took less time because a few things got done until 2 months ago. It was done for real 29/08/2013.

If someone with more patience than me does this they for sure can get better results than what I got so may this post help anyone who wants to have their own customs, if that's possible.

Also so sorry for the text and language mistakes, I tried to make some revisions to the first draft and make things a bit easier to understand as I edited this. English isn't my mother language either so hopefully this is all OK as it is. 😅

The doll seat they're using is a Calico Critters/Sylvanian Families one, in terms of seats their items work pretty well for this. A smaller doll type like nendoll probably will work a bit better, even if a bit big for other types of furniture (still not as big as this one).