Custom Stone Toa !

✨Custom stone Toa !✨

Yay ! It’s so big there are shadows on the top of my shelf studio.

Also, we’re already at 4/6 for these, isn’t that crazy ? I think it is.

Details below the cut !

Front/back :

I had some kind of vision with this one. As I started messaging by around with pieces, my brain said 'scorpion'. So mandibles and tail (and that’s about where the scorpion resemblance ends). Of course, I had to keep an element of Pohatu, so his foot is the end of the tail (which is quite wobbly-).

I tried to vary shapes from what I had previously, so I made some big shoulder parts, which look okay and offer some interesting movements, but are pretty weird if you think about it too hard.

The body-legs connection is a bit thin, but it still kind of work with the overall design, so I left it that way (that, and I am running out of brown pieces…)

The weapon are simple sticks with harpoons (?), nothing too complicated, though it was meant to be a single stick originally, it was waaaay to long for the photos. Also, has anyone any idea of which set these harpoons (still '?') come from ? I can’t seem to find it, apparently.

Side shot :

As you may see, I’ve made all the limbs quite thick, because it fitted what I had in mind well, and I messed with a bunch of old pieces for the legs (mostly the sand pieces). There is also have a Bohrok’s body for each foot, because these work surprisingly well, and the middle segment of the leg is backward to give some hypothetical springiness to the legs. Also, Rahkshi feet as armor, that’s always a good recipe.

Head shot ! (Ah, that’s funny.)

Look at how dark that shot is ! If only I had taller shelves…

Anyway, the head is a mix of Rahkshi and Vahki heads, which mix well (there is also a gear underneath. Don’t ask me why. It just exists.)

All of that makes it looks like a V2 Rahkshi (when there is a single stick) which was pretty much on purpose.

On a side note, I’m pretty much done with my big project (which is good, I’m meant to expose it this weekend. Whoops, that’s suddenly very close.)

And, yes, I finally added the #moc, thank you for reminding me every time, I’ll add it from now on :}

What are we

Boop

That is a very boop question.

✨Custom Bionicle !✨

Today (and next week, too) was a good excuse to get these out of their shelf and showcase them (and wipe the dust away, too.

These are my custom/modified Toa Ru-Fahi, which are a reeeally fun project.

Other angles and details under the cut !

Before going any further, I can’t not link this post, because I made the name of these customs out of it, and also because it’s just so good of a work. Just check it out.

Atuaga Ru-Fahi

The most custom of the ones I’ve made for this series, even if some might spot some inspiration from Kongu Mahri. It turned out to be more silver than black, but it nonetheless remains the Earth Toa. I’m quite happy of how it turned out, with the red accents to fit the weapons, and its overall shape. The contours of the body made with tubes are also something I had never done before. One of the techniques I use to get a thicker effect is to superpose two 'limb' pieces on top of each other; but I also have multiple usage of bohrok hand pieces to get rounder effets, with some texture.

The cable going through the mask is connected directly to the shoulders, and it has a purpose which will be explained somewhere underneath. Also, the Kanohi is Norik’s great Pehkui, which is probably one of the coolest of my (extensive) collection.

Gali Ru-Fahi

Have you recognised her ? Probably, I gave her name. Gali’s always been one of my favourites, so I had to include her. More specifically, this one is a modified version of Gali Mistika, because that whole set was already pretty good as is. Here again, probably went overboard with the silver pieces, but oh well. The tubes are connected to the top of the Kanohi, because there were already holes there. With this one, I used arm pieces to get the torso’s shape. The shoulder plates I have not touched, because they’re a nice unique part. The back piece is a Rahkshi’s foot (in shape, because there’s sadly no dark blue Rahkshi).

The weapons are just a long axe covered by a tube, and the heads are stolen from another Gali (the new gen ones).

Lore-wise, I don’t really have anything for these, except that this Toa team is made out of Toa from different teams (chosen arbitrarily for their look) and are fighting is space (hence the breathing tubes, which is the element I keep on all these customs (only two here, but I promise two more next week). If anyone has any idea, I’m open. Considering what else I’ve on my shelves, the bad guys could be giant bugs, but that’s as far as my ideas go.

See you next week :}

✨Custom water Toa !✨

Another one ! (Slightly less giant)

Details below the cut !

Front/back views

That one, too, is experimental, albeit in another style. I tried to remain closer to actual Bionicle size this time. Many fun details and technics here, so we’ll go from the feet all the way toward the head.

So, starting with the feet ! I have a complex of normal feet and Visorak legs held by a single connector. They have a wide angular range, but given that the connector connecting the socket to the feet is alone, a foot can also have a 360 rotation angle horizontally (not natural-)

The legs don’t have much special traits, except the upper legs using two socket with axle holes on top and a silver foot as armor on the side.

The body is where things get interesting. The Rahkshi silver shell is held by the silver claw above it at a chest plate, while part of the back is hidden behind a Rahkshi foot. The body is very triangular because it’s framed by these sockets with a silver piece in the middle, which gives it a nice aesthetic. The arms are an equivalent, with some tubes directly in the shoulders to offer a flexible piece which also limits the movements.

Finally, the head is not a head. I’ve made it like that because of the translucent Kanohi, that way it looks brighter, the inconvenient being that the backside of the head is quite literally an empty shell.

Now for the lower part of the arms : no socketed hand because who needs hands when you have a trident (bident ?) ! The main piece obviously comes from a Rahkshi, and the magic is wishing the silver connector. It used to be a lightsaber hilt from the larger Star Wars figs, but it looks good practically everywhere, including here !

Also, here below is a picture of the angle range of the arms (not much, oops).

Get booped

Get booped back ! Ah !

Oh, and have an actual (Lego) cat while I’m at it !

A tangent about hexagons

Because the project I’m working on brought it, I found it interesting, and I thought some people might need it.

So, as I’m working on a quite large project (hopefully done by next week, although I have doubts on that), and the base structure of it is more or less hexagonal. Anyway, here are some of my tips to get good hexagonal shapes.

The easiest way to do this is obviously with hinges and plates, like that :

While not necessarily accurate, it’s cheap and efficient, albeit squishy, and can be expanded to any size.

Instead, we can go the technical way, and use maths, by considering that a hexagon is the combination of 6 equilateral triangles. We end up with this :

Practically unbreakable, very stable, and can be made with as much technical bricks as possible, so it is easily expandable, but it’s harder to attach it to classic bricks.

So, none of these two designs are really good alone, whether on pure usability, or on durability. Alone, that is. Now, here is the fun part : thanks to the way Lego works…

…they work together ! And, with some modified 2*2 plates, they mostly hold to one another ! Isn’t that awesome ? What’s more is that, while I’m using 2*4 plates and a 7 holes technic bars, that also works with 2*6 and 11 holes bars, which is good.

Now, let’s apply this knowledge to make a solid prism with an hexagonal base :

By using a bunch of plate and two of these hexagonal bases, we get a hollow tube, which is solid through the hexagons, but can still break because of a diagonal force. To fix that, we need to add supports between the supports, like so :

This also means that this design becomes stackable. Congrats, you made a long hexagon tube ! It can also be round, with the right modifications, notably with 2*2 curved tiles :

It fits perfectly, and it’s good to make solid near-circles !

Sorry for the photos’ quality !- They were taken quite late with my phone, and without proper lighting.