Hello there ~ I'm 26 yo student. My hobbies are knitting and embroidery. I post pictures of my old and current projects
69 posts
Lailysultan - Sultan X Stitch - Tumblr Blog
Another doily is done :)
Moonpetals by Julia Hart
Crocheted a doily for the 1st time. Super happy how it turned out 😊
Nova Frost by Julia Hart
Cactus mittens
Pretty simple fingerless mittens with thumb gusset worked in seed stitch pattern.
Under the cut there are instructions how to knit similar mittens. The instructions are written by me, and hadn't been checked for mistakes and typos.
Mittens page on Ravelry.
To fit a middle size hand ~18 cm.
Finished measurements: Width 8.5 cm / 3.3 in; Length 16 cm / 6.3 in.
Needles: 2.75 mm / US 2;
Yarn: Knoll Lambswool, 100% merino, 420 m (459 yards) / 100 g
Gauge: 26 stitches and 36 rows = 10 cm / 4″ in Stockinette stitch in the round.
CO 46 sts using Tubular CO method, join knitting in the round, pm for BOR. Work in 1x1 ribbing for 3 cm / 1 in. Work in stockinette stitch for 1.5 cm / 0.5 in.
Thumb gusset shaping (in seed stitch). round 1: k1, m1l, pm, k to BOR; round 2: k1, p1, slm, k to BOR; round 3: k1, m1l, k1, m1r, slm, k to BOR; round 4: k1, k1, p1, k1, slm, k to BOR; round 5: k1, m1l, WIP to m, m1r, slm, k to BOR; round 6: k1, WIP to m, slm, k to BOR.
Repeat rounds 5 & 6 until there are 27 sts for thumb (28 sts between BOR and m).
Next round: k1, put the following 27 sts on scrap yarn or holder, remove m, m1, continue working in the round. 47 sts on needles, 27 sts on hold.
Work in stockinette stitch for 2 more rounds. Next round: k1, ssk, k to BOR. Continue working in stockinette stitch for another 2.5 cm / 1 in.
Work in 1x1 ribbing for 3 cm / 1 in. BO all sts using tubular BO method.
Thumb Put sts from holder onto needles. Starting in the “gap” (where we made m1), pick up and knit 2 sts, WIP all thumb gusset sts, pick up and knit 2 sts, place m for BOR. 31 sts. With these 4 extra sts there won’t be any holes.
Round 1: k2, WIP to 2 sts before BOR, k2tog; Round 2: ssk, WIP to BOR; Round 3: WIP to 2 sts before BOR, k2tog; Round 4: ssk, WIP to BOR; Round 5: WIP to 2 sts before BOR, k2tog; 22 sts in total.
Work in 1x1 rib pattern for 3 rounds. BO all sts using tubular BO method.
Weave all the ends, wash and block.
Abbreviations: BOR - beginning of the round; m - marker; WIP - work in the pattern; k2tog - knit 2 sts together; ssl - slip slip knit; m1 - make 1 st using backloop method; m1l - make 1 left leaning; m1r - make 1 right leaning; pm - place marker.
WIP for seed sts: knit purl sts and purl knit sts.
Water lily socks
Designer Norah Lang / Fox & Folks [IG, Ravelry].
Socks’s page on Rav.
Size: M.
Yarn: Alize Superwash. Light fingering. 75% / 25% wool / nylon, 420 m (459 yards) / 100 g. Color 1 white.
Needles: 22.5 mm / US 1.
Gauge: 32 sts & 42 rounds = 10 cm / 4 in in stockinette in the round.
Yardage: 366 m / 400 yards.
---------------------------------------
Size M for EU39 shoe size.
20 lace repeats for leg before heel. 18 lace repeats for gusset & foot before toe.
Leg length - 24 cm / 9.4 in (incl. heel flap); Foot length - 24 cm / 9.4 in; Leg width - 18 cm / 7 in; Foot width - 19 cm / 7.4 in.
Seed Head socks
Designer Vikki Bird [IG, Ravelry].
Socks’s page on Rav.
Size: C. For a friend of mine with EU38-39 shoe size.
Yarn: Lang Yarns Jawoll Twin. Light fingering. 75% / 25% wool / nylon, 210 m (230 yards) / 50 g. Color 510 Lila.
Needles: 2.5 mm / US 1 2/5, 2 mm / US 0 (for ribbing).
Gauge: 34 sts & 44 rounds = 10 cm / 4 in in stockinette in the round.
Yardage: 253 m / 276 yards. Each sock was knitted from separate yarn ball.
---------------------------------------
Toe up socks with floral motif and 2 options for heel.
Foot: 3 full pattern repeats + 8 rounds before heel. Leg: 8 rounds + 2 full pattern repeats before last (2-45) rounds. Ribbing: 12 rounds on 2 mm needles.
Seed Head socks
Designer Vikki Bird [IG, Ravelry].
Socks’s page on Rav.
Size: C. For a friend of mine with EU38-39 shoe size.
Yarn: Lang Yarns Jawoll Twin. Light fingering. 75% / 25% wool / nylon, 210 m (230 yards) / 50 g. Color 510 Lila.
Needles: 2.5 mm / US 1 2/5, 2 mm / US 0 (for ribbing).
Gauge: 34 sts & 44 rounds = 10 cm / 4 in in stockinette in the round.
Yardage: 253 m / 276 yards. Each sock was knitted from separate yarn ball.
---------------------------------------
Toe up socks with floral motif and 2 options for heel.
Foot: 3 full pattern repeats + 8 rounds before heel. Leg: 8 rounds + 2 full pattern repeats before last (2-45) rounds. Ribbing: 12 rounds on 2 mm needles.
Active duty
Designer Max Cyr [IG, Ravelry].
Sweater’s page on Rav.
Size: M. My bust circumference is 92cm / 36in.
Yarn: Sandnes Garn Duo. DK. 55% / 45% merino / cotton, 124 m (113 yards) / 50g. MC - 212 (brown), CC - 2564 (yellow).
Needles: 4.5mm / US 7, 4mm / US 6 (for ribbing).
Gauge: 24 sts & 25 rounds = 10cm / 4in in colorwork stockinette in the round.
Yardage: MC - 681m / 623 yards, CC - 496m / 454yards.
---------------------------------------
Top down seamless sweater with raglan construction.
With a height of 160 cm I worked: rounds 1-61 of the body chart + ribbing; rounds 1-75 of sleeves chart + ribbing After 75th round I had 60 sts per sleeve -> next round with decreases -> 56 sts in total for ribbing.
Body length (front center, from collar) 53.5 cm / 21.1 in; Sleeve length (from collar) 65.5 cm / 25.8 in.
Active duty
Designer Max Cyr [IG, Ravelry].
Sweater’s page on Rav.
Size: M. My bust circumference is 92cm / 36in.
Yarn: Sandnes Garn Duo. DK. 55% / 45% merino / cotton, 124 m (113 yards) / 50g. MC - 212 (brown), CC - 2564 (yellow).
Needles: 4.5mm / US 7, 4mm / US 6 (for ribbing).
Gauge: 24 sts & 25 rounds = 10cm / 4in in colorwork stockinette in the round.
Yardage: MC - 681m / 623 yards, CC - 496m / 454yards.
---------------------------------------
Top down seamless sweater with raglan construction.
With a height of 160 cm I worked: rounds 1-61 of the body chart + ribbing; rounds 1-75 of sleeves chart + ribbing After 75th round I had 60 sts per sleeve -> next round with decreases -> 56 sts in total for ribbing.
Body length (front center, from collar) 53.5 cm / 21.1 in; Sleeve length (from collar) 65.5 cm / 25.8 in.
Into
Hello there!
Since there have been problems with Ravelry accessibility I decided to duplicate important information about my knitting projects. I will gradually do it starting with recent test knits.
I will tag every post with the appropriate hashtag (which is in use on IG) + #ravelry, so you can easily find the necessary project by using local search in blog system.
If you have any difficulties please send me DM here or on my IG.
My page on Ravelry.
P.S. hit “posts” button to see more.
Into
Hello there!
Since there have been problems with Ravelry accessibility I decided to duplicate important information about my knitting projects. I will gradually do it starting with recent test knits.
I will tag every post with the appropriate hashtag (which is in use on IG) + #ravelry, so you can easily find the necessary project by using local search in blog system.
If you have any difficulties please send me DM here or on my IG.
My page on Ravelry.
P.S. hit “posts” button to see more.
So good!
👏🏼
Today the Department of Extraordinary Embroidery is marveling at this awesomely exquisite cross-stitched recreation of John William Waterhouse’s 1908 Pre-Raphaelite painting, The Soul of the Rose. It was painstakingly created, one x-shaped stitch at a time, over a 4 year period by the mother of Twitter user @TamSepulveda.
[via Twisted Sifter]
Angelo and his crocheting
Pattern: Spin me around by Catherine Bligh
So good
Kristen Meyer
New experience. My very first work with beads.
Новая работа - новый опыт. Балуюсь с бисером.
She’s amazing 👏🏼
#embroidery #sailormoon #chibiusa
And I framed her!
I really have begun to enjoy framing things ;u;
She’s amazing 👏🏼
#embroidery #sailormoon #chibiusa
And I framed her!
I really have begun to enjoy framing things ;u;
Моя первая и пока единственная работа гладью. Отправилась на стену к одному замечательному человеку в качестве подарка.
My very first satin-stitch work. It was presented to one very nice person as a gift.